产品详情
简单介绍：
鑫成通售GPS接收系统
Ovenized quartz oscillator provides clean 10 MHz (1pps) signal that maximizes bandwidth
详情介绍：
鑫成通售GPS接收系统
Ovenized quartz oscillator provides clean 10 MHz (1pps) signal that maximizes bandwidth
Four outputs 10 MHz
One 1pps output ( 2nd 1pps output optional)
Ovenized quartz oscillator provides clean 10 MHz (1pps) signal that maximizes bandwidth
Four outputs 10 MHz
One 1pps output ( 2nd 1pps output optional)
Web GUI, Telnet, SNMP
Performance Specifications
General L1 Frequency, CA/code (SPS), 8-channel continous tracking receiver
Update Rate 1 Hz
PPS Accuracy UTC 20 nanoseconds (one sigma)
10 MHz Accuracy 1.16 x 10-12 (one day average)
10 MHz Stability See Graph ->
Harmonic Level -40 dBc max
Spurious -70 dBc max
Phase Noise 10 Hz -120 dBc/Hz100 Hz -135 dBc/Hz1 kHz -135 dBc/Hz10 kHz -145 dBc/Hz100 kHz -145 dBc/Hz
Holdover ±1 Microsecond over 2 hours with a maximum±15 °C Temperature change
Mechanical
Dimensions 19” (W)
1 RU(H)
13” (L)
Weight 6 lb (3 Kg)
Environmental
Operating Temperature 0°C to +50°C
Storage Temperature -40°C to +85°C
Operating Humidity 95% non-condensing
Interface
Input 4x 10MHz clock outputs
BNC connector. Waveform is sinusoidal
+12.5 dBm ± 2.5 dBm into 50 ohm
(factory adjustable by request)
Input 1x (optional) 1pps, BNC connector TTL levels into 50 ohm 10 milliseconds-wide pulse
Control RS232 - CLI control
Web GUI, Telnet, SNMP
Unit allows to control the following parameters:
1) Self Survey parameters
2) Antenna Cable Length (compensates the 1PPS delay)
3) Display Summary Alarms, aquisition errors
*All parameters are controllable from any user interface
Ovenized quartz oscillator provides clean 10 MHz (1pps) signal that maximizes bandwidth
Four outputs 10 MHz
One 1pps output ( 2nd 1pps output optional)
Ovenized quartz oscillator provides clean 10 MHz (1pps) signal that maximizes bandwidth
Four outputs 10 MHz
One 1pps output ( 2nd 1pps output optional)
Web GUI, Telnet, SNMP
Performance Specifications
General L1 Frequency, CA/code (SPS), 8-channel continous tracking receiver
Update Rate 1 Hz
PPS Accuracy UTC 20 nanoseconds (one sigma)
10 MHz Accuracy 1.16 x 10-12 (one day average)
10 MHz Stability See Graph ->
Harmonic Level -40 dBc max
Spurious -70 dBc max
Phase Noise 10 Hz -120 dBc/Hz100 Hz -135 dBc/Hz1 kHz -135 dBc/Hz10 kHz -145 dBc/Hz100 kHz -145 dBc/Hz
Holdover ±1 Microsecond over 2 hours with a maximum±15 °C Temperature change
Mechanical
Dimensions 19” (W)
1 RU(H)
13” (L)
Weight 6 lb (3 Kg)
Environmental
Operating Temperature 0°C to +50°C
Storage Temperature -40°C to +85°C
Operating Humidity 95% non-condensing
Interface
Input 4x 10MHz clock outputs
BNC connector. Waveform is sinusoidal
+12.5 dBm ± 2.5 dBm into 50 ohm
(factory adjustable by request)
Input 1x (optional) 1pps, BNC connector TTL levels into 50 ohm 10 milliseconds-wide pulse
Control RS232 - CLI control
Web GUI, Telnet, SNMP
Unit allows to control the following parameters:
1) Self Survey parameters
2) Antenna Cable Length (compensates the 1PPS delay)
3) Display Summary Alarms, aquisition errors
*All parameters are controllable from any user interface
